Header

Recycled Materials and Demolition Waste Testing

September 16th, 2015 | Posted by Cynog in News - (Comments Off on Recycled Materials and Demolition Waste Testing)

With over 35 years’ experience in testing building materials, Celtest can offer an independent UKAS accredited testing and sampling service that can help our clients demonstrate that their inert waste complies with industry requirements (i.e. WRAP Protocol, SHW – Standards for Highway Works).  To discuss further please contact us

Bond Work Index (BWI) Test

September 15th, 2015 | Posted by Cynog in News - (Comments Off on Bond Work Index (BWI) Test)
Bond Work Index Test

Celtest have the capability to carry out the Bond Work Index (BWI) Test in accordance with EPRI Report CS3612 : FGD Chemistry and Analytical Method Handbook, Volume 2 . The BWI is used to estimate the required mill power per ton of product (Specific Energy).  The specific energy requirements and the desired production rate determine …
Read more

BS EN 12697 – Bitumen Testing Service

September 10th, 2015 | Posted by Cynog in News - (Comments Off on BS EN 12697 – Bitumen Testing Service)
Wheel Tracking Test

With over 35 years’ experience in materials testing, Celtest offer a wide range of tests within the BS EN 12697 testing series. Should you require any testing that is not listed below, or require any further information, please contact us.   Binder & Grading (Binder determined by difference) Binder & Grading – Binder directly determined Binder …
Read more

Aggregate Abrasion Value (AAV) EN1097-8

August 20th, 2015 | Posted by Cynog in News - (Comments Off on Aggregate Abrasion Value (AAV) EN1097-8)

Celtest Limited are UKAS accredited to perform the Aggregate Abrasion Value (AAV) test to EN1097-8. For more information please contact us.

Site Testing Services

March 6th, 2015 | Posted by Cynog in News - (Comments Off on Site Testing Services)

  Celtest can offer a wide range of UKAS accredited on-site testing and sampling services. Should you require any of the testing listed below, or anything that may not have been listed, please contact us.           On-Site Concrete Testing Services Sampling fresh concrete on site:- BS EN 12350-1 composite sample   spot …
Read more

New Concrete Laboratory

January 15th, 2015 | Posted by Cynog in News - (Comments Off on New Concrete Laboratory)

Equipment and staff moved in to the new concrete laboratory facility at Trefelin in September 2014. The new location and building offers much improved facilities for both staff and services, as opposed to the former buildings at Cyttir. The new building is part of our long-term goal to gather everyone from the two sites (Cyttir …
Read more

Mohs Hardness Test

December 8th, 2014 | Posted by markroberts in News - (Comments Off on Mohs Hardness Test)

Celtest have the capability to carry out the Mohs Hardness Test. The Mohs scale of mineral hardness is a ranked, qualitative scale which characterizes the scratch resistance of various minerals through use of a harder material to scratch a softer material. The test was created by German Geologist Friedrich Mohs in 1812 and is still widely used today. For more information …
Read more

Shear Box Test (Angle of Friction)

October 19th, 2014 | Posted by markroberts in News - (Comments Off on Shear Box Test (Angle of Friction))

Celtest have the capability to carry out the Effective Angle of Friction on aggregate, soil, clay & sand samples. We have recently invested in a new shear box machine to increase our capacity and improve turn-around times. To discuss further please contact us. Shear Box Tests:- 1)      Effective Angle of Internal Friction and Effective Cohesion …
Read more

Rock Armour Stone Testing EN 13383-2

July 31st, 2014 | Posted by markroberts in News - (Comments Off on Rock Armour Stone Testing EN 13383-2)
Rock Armourstone Testing

Celtest have the capability to carry out on site and laboratory testing of Rock Armour Stone as detailed in EN 13383-2. With coastal defense projects on the increase, our site testing technicians can be mobilised anywhere within the UK to carry out testing and / or sample material to be returned to our laboratories for …
Read more

Polished Stone Value (PSV)

June 10th, 2014 | Posted by markroberts in News - (Comments Off on Polished Stone Value (PSV))
PSV Machine

Celtest have the capability to test aggregates for their Polished Stone Value (PSV) to BS EN 1097-8.  We have expanded our capacity  to accommodate continuing increased demand. For more information please contact us to discuss further. Suitable for – Aggregate