Header

Bituminous testing to EN 12697 Part 22: Wheel tracking

September 11th, 2017 | Posted by Cynog in News - (Comments Off on Bituminous testing to EN 12697 Part 22: Wheel tracking)

Celtest have the capability to test to EN 12697-22 Wheel Tracking. This test measures and records the rut formed by repeated passes of a loaded wheel at constant temperature and provides an indication of the susceptibility of the material to deform under load. For further information please contact us

Test for filler aggregate used in bituminous mixtures – Delta ring and ball test

July 6th, 2017 | Posted by Cynog in News - (Comments Off on Test for filler aggregate used in bituminous mixtures – Delta ring and ball test)

Celtest ltd have the capability to test for filler aggregate used in bituminous mixtures in accordance with BS EN 13179-1: 2013 – Part 1: Delta ring and ball test. The test procedure determines the stiffening effect of filler aggregate when mixed with bitumen.

Series 900 testing – Standards for Highway Works (SHW)

June 8th, 2017 | Posted by Cynog in News - (Comments Off on Series 900 testing – Standards for Highway Works (SHW))

Celtest can help you with testing your materials for compliance in accordance with the Standards for Highway Works (SHW) – Series 900. For further information on the various testing requirements for materials listed within Series 900, please contact us

Bitumen and bituminous binders — Determination of the softening point — Ring and Ball method

May 10th, 2017 | Posted by Cynog in News - (Comments Off on Bitumen and bituminous binders — Determination of the softening point — Ring and Ball method)
Ring and Ball method

Celtest ltd are UKAS accredited to determine the softening point of bitumen and bituminous binders in accordance with BS EN 1427. The softening point provides an indication of the temperature at which the bitumen becomes too soft to prevent the deformation of a mixture made from it. Please contact us to find out more.

Saturation Ageing Tensile Stiffness (SATS) Testing

March 23rd, 2017 | Posted by Cynog in News - (Comments Off on Saturation Ageing Tensile Stiffness (SATS) Testing)

Celtest have the capability to perform the Saturation Ageing Tensile Stiffness (SATS) test in accordance with EN 12697-45. The SATS test procedure assesses the sensitivity of a bituminous mixture to the effects of moisture and ageing.  Please contact us to find out more.

Bituminous Design and Testing Service

September 18th, 2015 | Posted by Cynog in News - (Comments Off on Bituminous Design and Testing Service)
Asphalt Testing Laboratory

With over 35 years’ experience in materials testing, Celtest offer a wide range of bitumen testing services. This includes helping our clients with their bituminous design processes. Testing within the range includes:- HRA Surface Course Design Protocol – BS 594987:2010 – Annex H (UKAS accredited) HRA Asphalt Mix Design (loads 1 to 25 kN) – …
Read more