Header

SHW CL 871: Coefficient of linear expansion

January 31st, 2018 | Posted by Cynog in News - (Comments Off on SHW CL 871: Coefficient of linear expansion)

Celtest have the capability to perform the coefficient of linear expansion test of HBM within the normal range of temperature for pavement layers in accordance to the Standard for Highway Works clause 871. To discuss your testing requirements, please contact us

BS EN 13286-43: Modulus of elasticity

January 31st, 2018 | Posted by Cynog in News - (Comments Off on BS EN 13286-43: Modulus of elasticity)

At Celtest we have the capability to determine the modulus of elasticity of specimens of hydraulically bound mixtures. The modulus is determined using either; the test on compressive strength, the direct tensile test, or the indirect tensile test. To discuss your testing requirements, please contact us

Hydraulically bound mixtures BS EN 13286: Part 41 Test method for determination of the compressive strength of hydraulically bound mixtures

December 4th, 2017 | Posted by Cynog in News - (Comments Off on Hydraulically bound mixtures BS EN 13286: Part 41 Test method for determination of the compressive strength of hydraulically bound mixtures)

Celtest are UKAS accredited to determine the compressive strength of hydraulically bound mixtures. This applies to specimens manufactured in the laboratory or prepared from cores.  To discuss your testing requirements, please contact us

Series 800 testing – Standards for Highway Works (SHW)

October 16th, 2015 | Posted by Cynog in News - (Comments Off on Series 800 testing – Standards for Highway Works (SHW))

Celtest can you help you with testing your materials for compliance with the Standards for Highway Works (SHW) – Series 800. For more information please contact us     Example of materials that we frequently process:- Type 1 Unbound Mixtures Type 2 Unbound Mixtures Type 3 (open graded) Unbound Mixtures Category B (close graded) Unbound Mixtures Type …
Read more