Header

Test for filler aggregate used in bituminous mixtures – Delta ring and ball test

July 6th, 2017 | Posted by Cynog in News - (Comments Off on Test for filler aggregate used in bituminous mixtures – Delta ring and ball test)

Celtest ltd have the capability to test for filler aggregate used in bituminous mixtures in accordance with BS EN 13179-1: 2013 – Part 1: Delta ring and ball test. The test procedure determines the stiffening effect of filler aggregate when mixed with bitumen.

Cement Bound Granular Mixtures (CBGM) Testing

October 23rd, 2015 | Posted by Cynog in News - (Comments Off on Cement Bound Granular Mixtures (CBGM) Testing)

Celtest have the capability to test Cement Bound Granular Mixtures (CBGM). Since the development of modern, versatile design approaches, the use of CBGM can help lower project costs and improve sustainability, therefore increasing demand for the product. Please contact us to discuss your testing requirements.  

Bond Work Index (BWI) Test

September 15th, 2015 | Posted by Cynog in News - (Comments Off on Bond Work Index (BWI) Test)
Bond Work Index Test

Celtest have the capability to carry out the Bond Work Index (BWI) Test in accordance with EPRI Report CS3612 : FGD Chemistry and Analytical Method Handbook, Volume 2 . The BWI is used to estimate the required mill power per ton of product (Specific Energy).  The specific energy requirements and the desired production rate determine …
Read more

Aggregate Abrasion Value (AAV) EN1097-8

August 20th, 2015 | Posted by Cynog in News - (Comments Off on Aggregate Abrasion Value (AAV) EN1097-8)

Celtest Limited are UKAS accredited to perform the Aggregate Abrasion Value (AAV) test to EN1097-8. For more information please contact us.

Dynamic Cone Penetrometer (DCP) Test

June 2nd, 2014 | Posted by markroberts in News - (Comments Off on Dynamic Cone Penetrometer (DCP) Test)
Dynamic Cone Penetrometer (DCP) Test

Celtest are now UKAS accredited to determine the Equivalent CBR Value of Unbound Soils using Dynamic Cone Penetrometer (DCP) in accordance with DIHM & HA Interm Advice Note IAN 73/06. The DCP instrument is designed for a rapid in-situ measurement of structural properties of unbound materials. The DCP is portable and suitable for use in …
Read more

Secant Modulus of Elasticity (MOE) to BS EN 12390-13 Method B

May 19th, 2014 | Posted by markroberts in News - (Comments Off on Secant Modulus of Elasticity (MOE) to BS EN 12390-13 Method B)
Secant Modulus of Elasticity

Celtest are now UKAS accredited to carry out the Secant Modulus of Elasticity in Compression in accordance with BS EN 12390-13 Method B.   For more information please contact us to discuss further.

Steel Slag Expansion (SSE)

May 12th, 2014 | Posted by markroberts in Laboratory Testing - (Comments Off on Steel Slag Expansion (SSE))
Steel Slag Expansion test

Celtest can carry out the Steel Slag Expansion test to BRE in-house method (BR 481 Appendix B). We have the capacity to test large volumes of work, and can modify the test procedure to meet the needs of your project. For more information please contact us to discuss further.