Header

X-Ray Diffraction (XRD) analysis

June 8th, 2017 | Posted by Cynog in News - (Comments Off on X-Ray Diffraction (XRD) analysis)

Celtest have the capability to organise XRD testing via our approved sub-contract laboratory. For more information please contact us

Series 900 testing – Standards for Highway Works (SHW)

June 8th, 2017 | Posted by Cynog in News - (Comments Off on Series 900 testing – Standards for Highway Works (SHW))

Celtest can help you with testing your materials for compliance in accordance with the Standards for Highway Works (SHW) – Series 900. For further information on the various testing requirements for materials listed within Series 900, please contact us

Bitumen and bituminous binders — Determination of the softening point — Ring and Ball method

May 10th, 2017 | Posted by Cynog in News - (Comments Off on Bitumen and bituminous binders — Determination of the softening point — Ring and Ball method)
Ring and Ball method

Celtest ltd are UKAS accredited to determine the softening point of bitumen and bituminous binders in accordance with BS EN 1427. The softening point provides an indication of the temperature at which the bitumen becomes too soft to prevent the deformation of a mixture made from it. Please contact us to find out more.

Cyclic compression test BS EN 12697-25

April 24th, 2017 | Posted by Cynog in News - (Comments Off on Cyclic compression test BS EN 12697-25)

Celtest have the capability to test the resistance to permanent deformation of a cylindrical test specimen of bituminous mixture by repeated load in accordance with BS EN 12697-25. Stiffness is a key fundamental property of a bituminous material because it is essential for analysing and modelling a pavement structure. For more information, please contact us

Saturation Ageing Tensile Stiffness (SATS) Testing

March 23rd, 2017 | Posted by Cynog in News - (Comments Off on Saturation Ageing Tensile Stiffness (SATS) Testing)

Celtest have the capability to perform the Saturation Ageing Tensile Stiffness (SATS) test in accordance with EN 12697-45. The SATS test procedure assesses the sensitivity of a bituminous mixture to the effects of moisture and ageing.  Please contact us to find out more.

Resistance of a Bituminous Mixture or Pavement to Fuels (BS EN 12697-43)

March 3rd, 2017 | Posted by Cynog in News - (Comments Off on Resistance of a Bituminous Mixture or Pavement to Fuels (BS EN 12697-43))

Celtest have the capability to determine the resistance of a bituminous mixture or pavement to fuels in accordance with BS EN 12697-43 Bituminous mixtures – Test methods for hot mix asphalt Part 43: Resistance to fuel. For further information, please contact us

In-situ permeability of hot mix asphalt (HMA) test – BS EN 12697-40

April 22nd, 2016 | Posted by Cynog in News - (Comments Off on In-situ permeability of hot mix asphalt (HMA) test – BS EN 12697-40)

Celtest can perform the in-situ drainability (relative hydraulic conductivity) of hot mix asphalt material (HMA) in accordance with BS EN 12697-40. To discuss your testing requirements, please contact us

ENA 97-1 Technical Specification Testing (Cable Installations)

January 7th, 2016 | Posted by Cynog in News - (Comments Off on ENA 97-1 Technical Specification Testing (Cable Installations))

To find out more about the testing requirements within ENA 97-1 for cable sand, please contact us.

Cement Bound Granular Mixtures (CBGM) Testing

October 23rd, 2015 | Posted by Cynog in News - (Comments Off on Cement Bound Granular Mixtures (CBGM) Testing)

Celtest have the capability to test Cement Bound Granular Mixtures (CBGM). Since the development of modern, versatile design approaches, the use of CBGM can help lower project costs and improve sustainability, therefore increasing demand for the product. Please contact us to discuss your testing requirements.  

Series 600 testing – Standards for Highway Works (SHW)

October 20th, 2015 | Posted by Cynog in News - (Comments Off on Series 600 testing – Standards for Highway Works (SHW))

Celtest can help you with testing your materials for compliance against the Standards for Highway Works (SHW) – Series 600. For further information on the various physical and chemical testing requirements for materials listed within Series 600, please contact us       1A – Well graded granular material (General fill) 1B – Uniformly graded granular material (General …
Read more